Skip to content

Restore & Upgrade

Concrete Resurfacing in Cypress, TX

Resurfacing renews the top of exterior concrete you already have — patios, pool decks, walkways, entries, and select driveways.

Overview

What This Service Covers

Concrete resurfacing puts a new wearing surface over an existing exterior slab instead of removing it. A cementitious overlay or coating is bonded to the prepared concrete, then finished — smooth, textured, stained, or stamped — so a sound but tired slab reads as new work.

The important part is what happens before anything is applied. A resurfacing product only performs as well as the slab under it and the preparation done to it, so the surface has to be cleaned, profiled, and evaluated first. Old sealers, curing compounds, paint, and heavy staining all have to be dealt with, and any movement in the slab has to be understood before a finish goes on top of it.

CXS Concrete Solutions handles exterior work only. Everything on this page refers to outdoor concrete — patios, pool decks, paths, entries, and drives — not indoor floors.

Every project starts on the CXS Concrete Solutions side with a walk of your property in concrete services in Cypress or a nearby community, followed by a written estimate.

Fit

When Exterior Resurfacing Is Worth Evaluating

  • Patios and pool decks that are structurally sound but discolored, dated, or dull
  • Surfaces with light surface wear, scaling, or crazing rather than deep structural cracking
  • Concrete where the layout and drainage already work and only the appearance is the problem
  • Homeowners who want a decorative look over an existing slab rather than a full tear-out
  • Adjacent surfaces poured at different times that no longer look like one space
  • Entry areas and walkways where a smooth or textured finish would change how the front of the house reads

Scope

Exterior Resurfacing Scopes

Patio resurfacing
A new finished surface over an existing patio slab, often extending across steps and edges so the whole area matches.
Pool-area resurfacing
Refinishing the deck around an existing pool, with texture and edge detail handled separately from the field.
Walkway and entry resurfacing
Front walks, porches, and entry landings refinished so the approach to the house looks intentional.
Driveway resurfacing
Considered case by case. Vehicle loads and tire scuffing are harder on an overlay than foot traffic, so the slab condition drives whether this is advisable.
Decorative overlay
A stamped, scored, or patterned overlay applied over the prepared slab where the goal is a new look, not just a new surface.
Stained or color-integrated finish
Color worked into or applied over the overlay, with the existing slab's condition affecting how evenly it takes.

Groundwork

Surface Preparation and Evaluation

Preparation is the majority of a resurfacing project. Before any material is applied, the existing slab is cleaned and profiled, and the cracks and joints in it are evaluated to judge whether they are cosmetic or a sign of movement.

Preparation checklist

  • Cleaning to remove dirt, organic growth, oils, and surface contaminants
  • Identifying existing sealers, coatings, paint, or curing compounds that would block a bond
  • Mechanical profiling of the surface so the overlay has something to grip
  • Evaluating cracks for width, elevation difference between sides, and whether they appear active
  • Honoring existing control and expansion joints in the new surface rather than covering them over
  • Checking how water currently leaves the surface and whether resurfacing changes it
  • Looking at what sits above the slab — irrigation spray, downspouts, planters — that will keep wetting the finish

Overlay and Finish Materials

Product choice depends on the condition of the slab, the finish you want, and the exposure the surface gets. We select the system after seeing the slab rather than proposing one product for every project.

  • Polymer-modified cementitious overlays for exterior wear surfaces
  • Bonding preparation appropriate to the profiled slab
  • Texture selection influenced by wet-surface traction, especially near water
  • Color applied integrally or as a stain, with the substrate affecting the final tone
  • Protective topcoat selection where the surface warrants it
  • Compatibility with adjacent surfaces so the resurfaced area does not clash with what stays

Appearance

Exterior Resurfacing Finish Options

Textured overlay
A knockdown or broom-style texture that adds traction on outdoor surfaces that get wet.
Stamped overlay
A pattern impressed into the overlay for a stone or tile appearance over the existing slab.
Stained finish
Color applied to the surface, with variation that reads as depth rather than a flat paint layer.
Scored or sawn pattern
Cut lines that break a large surface into panels and give the field a deliberate layout.
Border and banding detail
A contrasting edge or band around the field, useful where a resurfaced area meets concrete that stays.
Smooth-troweled finish
A tighter finish used in covered or low-traffic exterior areas where traction is less of a factor.

Gallery

We publish resurfacing photos as those projects are completed and documented. Current CXS project photography is on Our Work.

Investment

What Affects Resurfacing Cost

Resurfacing is priced from the condition of the slab and the finish selected, not by a rate per square foot alone. Two patios the same size can price very differently once preparation is understood.

  • Area to be resurfaced and how broken up it is by steps, edges, and obstacles
  • How much preparation the existing surface needs, including removal of old coatings
  • Crack and joint treatment required before the overlay goes down
  • The finish selected — a plain texture and a stamped, multi-color overlay are not comparable
  • Access to the area for equipment, materials, and cleanup
  • Whether any grading, drainage, or edge repair is included in the same scope
  • Site protection needed around pools, landscaping, and finished surfaces that stay

We don't publish prices for this service. Pricing comes from a site visit and a written estimate specific to your property.

Process

How a Resurfacing Project Runs

  1. Step 01

    Site evaluation

    We walk the slab with you, look at cracks, drainage, and existing coatings, and talk through whether resurfacing is a reasonable approach for that surface.

  2. Step 02

    Scope and written estimate

    You receive a written estimate describing the preparation, the system, the finish, and what is and is not included.

  3. Step 03

    Preparation

    The surface is cleaned and profiled, existing coatings are addressed, and cracks and joints are treated as the scope calls for.

  4. Step 04

    Application

    The overlay is applied, worked, and detailed to the selected finish, with joints carried through the new surface.

  5. Step 05

    Color and protection

    Stain, color, and any topcoat are applied once the surface is ready for them.

  6. Step 06

    Walkthrough

    We walk the finished area with you and go over how long to stay off it and how to care for it.

Aftercare

Living With a Resurfaced Exterior Surface

A resurfaced surface is a finish layer on outdoor concrete, and it lasts longer when it is kept clean and not left sitting wet under constant runoff.

What we ask of you

  • Stay off the surface for the period we give you at the walkthrough
  • Rinse and sweep regularly rather than letting organic growth build up
  • Keep irrigation spray and downspout discharge off the finished surface where possible
  • Avoid dragging metal furniture and heavy planters across the finish
  • Ask us before using any de-icing product or aggressive cleaner on the surface
  • Tell us early if a crack reappears or an edge lifts so it can be looked at

Learn more before you decide

Background reading on exterior concrete condition, drainage, and what shapes project cost.

Concrete Resources: planning and cost factors

Coverage

Where We Provide This Service

Serving Cypress, TX and nearby communities. Estimates by appointment.

Questions

Concrete Resurfacing FAQs

Get a written estimate for your concrete resurfacing project

Send project details and photos and we'll follow up to schedule a site visit in Cypress or a nearby community.